kiddswivle17632 kiddswivle17632

03-03-2020
Computers and Technology

contestada

You need to connect a workstation to a switch using a regular port on the switch (not an uplink port). The switch does not support auto- MDI. Which type of cable should you use.

Respuesta :

SerenaBochenek SerenaBochenek

03-03-2020

Answer:

The correct answer to the following question will be "Straight-through ".

Explanation:

It's a kind of twisted-pair wire used for interact a device to a networking center like a modem or router in LAN.

By linking two separate kinds of connected devices, use this cable.
This connection is often applied to this as a repaired cable, too.

So, it's the right answer.

Answer Link

Otras preguntas

Why is RNA necessary to act as messenger?

When was World War I?

Can u paraphrase the quote ”let things take their course”

What is two thirds minus six thirds

How is the numeral 35.012 written in words and why

two identical freight cars roll without friction towards each other on a level track. one car rolls 2 m/s the other 1 m/s. after the cars collide they couple an

two identical freight cars roll without friction towards each other on a level track. one car rolls 2 m/s the other 1 m/s. after the cars collide they couple an

You have a cylinder with a diameter of 15 inches and a height of 12 inches. What is the volume of the largest sphere thg will fit inside it? If you can will you

A 1 digit number and a 3 digit number have a sum of 205. The same two number have a difference of 195, a product of 1,000 and a quotient of 40. What are the t

Does the depth of a pan affect how water freezes?